The Squire Belt at 12th Night

Squire BeltWell, I finished the belt.  I was surprised at how well it tuned out and how easy applying the suns and crescents turned out to be.  I received several compliments on this belt at 12thNight, the most important one coming from my beautiful lady, Cristiana.

To finish the belt I first had to attach the metal plaques I’m using as a buckle to the leather strap.  Each plaque has two prongs on one side designed to hook through the loop on the other side of a corresponding piece.  To use two of these as a buckle I had to attach the ‘loop’ side of one plaque to the leather which I did using two rivets.  The other plaque is attached by punching two holes in the other end of the leather, passing the prongs through these holes, and bending them down to hold it in place.

12th Night

I then made a pattern jig out of a scrap piece of belt leather to match where the holes had to be to attach the suns and crescents.  I measured the correct distances between where each piece needed to be attached, held the jig in the right spot, and used a leather punch to make the holes.  The pieces fit in perfectly and I bent the tabs over on the back side of the belt to hold them in place.  I used a ball-peen hammer to bend them over so they wouldn’t catch and snag my tunic.

 The red color of this belt is actually a bit darker than these pictures appear to be.

~ Gerald

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s