Born of passion and devotion – Cristiana is by Ieuan and Gwyneth made Laurel.
For a long time now, I’ve been thinking that it would be wonderful to see more women in An Tir wearing frilled veils. People always comment about how much they like them, but no one thinks they have the time to make one. And in all honesty, I can understand why some are reluctant. I have made five different ruffled veils now, and most of them took between 75-100 hours to make. Of course, each of those required a fair amount of research and experimentation, and were made using medieval techniques.
What if I could use a few simple short cuts to cut down on the time involved in making a frilled veil? Could I make a ‘department store’ version of the ‘couture’ veil? Could a ruffled veil be made in a single day? I was going to find out…
Supplies needed for this Quick Ruffled Veil:
Machine hemmed (rolled serge is perfect) oval veil
Bias tape maker (just the simple style)
‘Disappearing’ fabric marker
I decided to start by using something that I already owned, an oval veil that I had purchased online years ago from Revival Clothing(http://www.revivalclothing.com/linenrectangularandovalveils.aspx). This was actually my very first veil. It was machined hemmed with a serger rolled hem. Because of this, I no longer really liked to wear the veil, preferring to wear veils that have been hand hemmed. However, this made it a perfect place to start for my Quick & Easy Ruffled Veil.
After the unfinished front edge of the veil was pressed, I did a standard rolled hem around the entire semi-oval veil. This was a fairly quick and simple process, as the curved portion already had a serger finished edge. I find that hemming is always quicker when fabric has been serged first.
The next step was to cut the remaining half of the original oval veil into two inch strips using a quick rotary cutter. I then ran these strips through a bias-tape maker, pressing the strips flat with an iron. After these strips were pressed into 1 inch bias tape, I then folded them in half and pressed them flat again.
When the bias tape was completely pressed, I used a simple running stitch to sew the two sides together. I did this by hand, but it could be done using a sewing machine, if you are short on time. Then I used a ‘disappearing fabric marker’ to mark every half inch on the veil tape. By marking with a pen instead of using straight pins, a significant amount of time was saved. After that, I used the same fabric marker to place small marks every quarter inch on the front edge of the hemmed veil. By stitching the veil tape to the veil at a 2:1 ratio, a nice ruffle is created.
Finally, the veil strip is sewn to the front edge of the veil with a whip stitch. I would line up the marked dots and anchor with two whip stitches. Then I would bend the veil tape the opposite direction and do the same thing at the next mark. After the veil strip is permanently attached, I simply sprayed some water on the edge of the veil and all of the blue marks just disappeared.
Overall, I am extremely pleased with this veil. The entire process took me about 10 hours to complete. I made mine on a Saturday, but I think that this project could easily be completed in a week if you spent an hour or two working on it each night. That is a realistic time commitment for most medieval veil enthusiasts. 🙂
Twelfth Night is merely a month away for many of us, but this is still plenty of time to create a simple and stunning ruffled veil.
Last spring, after the Kingdom of An Tir’s A&S championship, Queen Gwyneth Gower asked if I would be willing to make a frilled veil for her. I could not pass up the opportunity to veil a beautiful 14th century Queen who happened to also be a dear friend of mine.
And so the search began…how to veil a Queen?
After gathering several images of Royal ruffles, I began to consider the best style of frilled veil for Queen Gwyneth. I decided to create a long veil that could be folded on itself three times to match many of the brasses that appear to have three layers of ruffles. I consulted with Maitresse Elisabeth de Besancon, who had created a longer 15th century ruffled veil in this style.
With much consideration, I set out to construct Queen Gwyneth’s veil at three times her shoulder to shoulder measurement with a front and back ruffle. This would be folded to create a layered ruffle look. After reading a report on a 14th Century Queen’s ruffled veil find in Prague that had included some embellishment, I made the decision to add a pearl embellisment to Queen Gwyneth’s veil.
When thinking about how to design this fretted veil, the thing I struggled with the most was always shape. How many layers were the frets actually attached to? Was it one long veil folded back and forth? If so, wouldn’t the frets collapse as they were bent around at the folds? In the end, I designed one row of frets and folded the veil linen in half, with a center seam. It was the images below, which can be located at http://www.larsdatter.com/frilled-veils.htm, that gave me a better idea of how the sides of a frilled veil might hang and look.
I entered this veil as a single entry in An Tir’s Kingdom A&S competition in March. Despite months of previous work, I was still up much of the night with final preparations. Thank goodness for a couple of my dearest friends who stayed up to help me and keep me going. 🙂
In the spring of 2005, I attended my first event in the Society of Creative Anachronism (SCA), an Ithra session of classes. I was nervous, excited, and absolutely convinced that I could not set foot at an event without a hat on my head. And so I made a hat, which I loved. It was the first garment I constructed on my own. Later that spring, I came to an important realization while attending my second event, Glymm Mere’s Mayfair, a revelation that would influence my entire SCA experience. What a fourteenth century English woman really needs is a veil…
…and the rest is history.
“Images of frilled veils are extensive and span from the middle of the thirteenth century until well into the fifteenth century (Newton & Giza, 1983). These veils start out with soft edges and with each passing decade become increasingly more elaborate in presentation and more numerous in layers.
Known by many names, (frilled, ruffled, crimped, goffered, kruseler, fluted, wrinkled, fretworked) veils are depicted in artwork, the stained glass windows of churches, stone statuary, and even woven tapestries. However, it is the burial tomb effigies and brass etchings, in their abundance, that offer the best look at the unique women’s head coverings of the late fourteenth century.
I have long been drawn to the exquisite burial tomb of Catherine de Beauchamp. She wears a detailed and complex fretwork veil that is a thing of beauty. Born in 1314, Catherine Mortimer was buried as a Countess along-side her husband Thomas de Beauchamp, 11th Earl of Warwick after their deaths in 1369. Her effigy wears a spectacular headdress which consists of two veils. A simple (likely woven) frilled veil sits over the top of an elaborate 12-layer fretwork veil (Sturtewagen, 2006/2007). The fretwork extends to the back of the veil, as well.
While researching my previous veil projects, I developed a fascination with the idea of creating a fretwork veil. Catherine de Beauchamp’s veil became my inspiration. Avena Foljambe’s effigy headdress, described by Margaret Scott (1986) as a thick combination of fluted veils stylized into a fretwork, is another beautiful example of this medieval English style.
The veil, itself, is a rectangle long enough to be doubled. This allows sufficient length to fold it in half, sewing a seam in the center on the underside of the veil. My previous frilled veils were both semi-oval in shape, which was likely less common than a rectangular veil in the fourteenth century. For this reason, I was excited to try this new shape.
My early experiments indicated that it would be beneficial to slightly pleat the fretwork strips in order to increase the fullness of the fabric and allow the frets to open more easily when starched.
My initial plan was to fold the fretwork strips in half, with the crisp fold facing towards the front to provide a very neat appearance. However, upon examination of the pleating in the extant ruffs featured in Janet Arnold’s Patterns of fashion 4 (2008), it was clear that the linen had been hemmed on the front (outer) edge. Some of these ruffles were folded at the neckline, creating a multi-layer effect. As such, I decided to hem the outer edge of the fretwork veil strips, as well.
I conducted experiments in starching with both wheat and rice using the original sample fretwork piece that I had constructed. They provided some interesting results.
Due to the yellow/gold discoloration caused by utilizing wheat starch, I opted to starch the fretwork with a rice starch solution.
During my initial experiments in starching a fret strip, I tried pinning the frets open to dry after submerging them into the liquid starch. This process was difficult, did not result in crisp points on the frets, and basically starched small holes into the linen. For my next attempt at starching I made the decision to try using starching sticks. The idea was to fill the fret holes with something that would mold them into the proper shape while drying. Janet Arnold (2008) mentions the use of starching sticks and even displays two of them (reproductions) in Patterns of Fashion 4: The Cut and Construction of Linen Shirts, Smocks, Neckwear, Headwear and Accessories for Men and Women.
In the end, I was quite pleased with the results. 🙂
Arnold, J. (2008). Patterns of fashion 4: The cut and construction of linen shirts, smocks, neckwear, headwear and accessories for men and women. London: Pan Macmillan Ltd.
Newton, S. & Giza, M. (1983). Frilled edges. Textile History, 14 (2), 141-152.
Scott, M. (1986). A visual history of costume: The fourteenth and fifteenth centuries. London, UK: B. T. Batsford Ltd.
Sturtewagen, I. (Winter 2006/2007). En kruset hoveddug: Catherine de Beauchamps hovedtØj.
After marking all 1200cm of veil tape, the pleats were made by placing a running stitch at each marker. Once the pleats were drawn up, the veil tape was attached to the veil with a simple whip stitch. Two stiches were used to attach each pleat.
I was extremely pleased that after all of the measuring and pleating, there was only about 5cm left of unused ruffle. The calculations turned out to be quite accurate. This veil drapes and moves differently than the first frilled veil that I made.
It has been an experience to learn to pin and display it in ways that I had not previously tried. I feel a special bond with this project, as it was my first well-researched creation.
And now for the next frilled veil… 😉